Make your bike stand out with these MotoGP style rim decals.
The rim decals consist of 3 parts per wheel side, 12 parts per set, enough for both sides of both wheels. The decals are 7 mm wide, and each part is 40 cm long. Every part features a set of reflective blocks in ever decreasing sizes. These rim decals fit 17 inch wheels with a rim edge width of 7 mm or more.
The strips are easy to apply to the rim and stay on due to a strong adhesive tape
Installation guide:
- Clean rims thoroughly
- Degrease
- Fully dry, if necessary blow dry with air.
- Wet the rim evenly. This allows you to reposition the decals for a short while after application.
- If possible, make sure you have enough light to work in, and keep a soft, lint-free cloth at hand. Check again if there is enough water on the rim. If not, the strong adhesive tape will immediately stick to the surface of the rim, and repositioning is no longer possible.
- Removing the decal from the rim
- Place the decal on the rim. It may be that the curve of the decal does not completely match the curve of the rim. However, you can easily adjust this.
- After applying the decal, press on it firmly with a dust-free cloth, forcing the water away from under the decal. After a short while (depending on the amount of water remaining) the decal will be adhered.
- Remove the application tape.
Precautions:
- Do not apply the decals on top of each other, this to prevent rolling up, loosening etc.
- After 3 days the decals will be adhered strongly enough to allow the motorcycle to be washed again.
- Do not use corrosive detergents, only detergents intended for synthetic materials.
- Do not use high-pressure water jets on the rim decals to avoid damage and peeling.
