Suitable for tyres with a width of 90 - 120 mm
Suitable for wheels with a diameter of 18 - 21 inches
Fix your motocross or enduro bike to a trailer or van in the blink of an eye with the Acebikes Steadystand. This wheel clamp makes good use of gravity. You drive the bike in and it anchors itself with its own weight. This makes it easy to further secure the motorcycle on your own with tensioning straps.
This model is specifically developed to be fixed to the floor of a trailer or van. The wheel clamp can be assembled in two different ways: with the attachment points facing outwards for a wider ground plane, or with the attachment points inwards for a narrower ground plane.
This Steadystand is suitable for tyres between 90 and 120 mm wide and wheels between 18 and 21 inch.
The wheel clamp is adjustable for height from 65 to 90 cm.
Choosing the right wheel clamp for your scooter is much easier than it seems. You have to take into account only two things: the width of your front tyre and the
diameter of your front wheel. And those two dimensions you can read very easily from the
from the tyre.
Each scooter tyre has a similar code, like
on the example below:
The code contains a lot of information, but the only thing you need to know to be able to The code contains a lot of information, but the only thing you need to know in order to choose the right wheel clamp, is:
- The width of the tire, expressed in mm. In this case it is 110.
- The diameter of the wheel, expressed in inches. In this case it is 19.
