Suitable for tyres with a width of 80 - 120 mm
Suitable for wheels with a diameter of 10 - 13 inches
A Steadystand allows you to safely park a scooter. And we're not just thinking about the garage or on the street, but also in a motorhome or trailer, where you definitely want to keep your front wheel firmly in the same place.
The rubber base keeps the Steadystand neatly in place when you push your scooter in the stand. It will fit tyres sizes between 10 and 13 inches and tyre widths between 80 and 120 millimetres without a problem. Most current scooter models will fit in this range. Of course, it is important that you find a firm spot for the Steadystand itself. That shouldn't be an issue as the whole thing is made of relatively light material with a fitted handle. Due to the tilting part your scooter is prevented from rolling off the stand.
So just aim, park, fix and attach the safety straps, if applicable. Don't forget the straps when the stand is used in a motorhome or trailer. The Steadystand is not enough to keep the scooter in place on its own, in a moving vehicle.
This Steadystand is suitable for tyre widths between 80 - 120 mm and wheel sizes between 10 - 13 inches.
Choosing the right wheel clamp for your scooter is much easier than it may
seem. You only need to take two things into account: the width and the diameter
of the front tyre. Both
dimensions can be found on the tyre.
Each scooter tyre has a
similar code, like on the example below:
The code contains a lot of information, but the only thing you need to know in order to choose the right wheel clamp, is:
- The width of the tyre, expressed in mm. In this example it is 100.
- The diameter of the wheel, expressed in inches. In this example it is 10.
