The professional II is made of a mix of 150D polyester and 600D polycotton. polycotton, the fabric is waterproof and UV resistant. The cover has ventilation openings so no moisture is retained and the risk of corrosion is greatly reduced. is reduced. The cover comes with a storage bag, but because of the heavier fabric this cover cannot be packed very compactly. The Professional II cover can be secured with a padlock (0,5 cm diameter) so that the cover cannot be taken off the motorcycle. can be taken off the motorcycle.
The most important criteria when choosing a size, are the measurements. The correct measurement of your motorcycle is very important.
First measure the width of the handlebars (B), as indicated by the green line in the picture below. If your mirrors are wider than your handlebars, measure them too.
Then measure half the circumference of the bike (A), as indicated by the red line. indicated by the red line. It is important that you measure the bike at its widest. If you have panniers and you do not want to remove them before covering the bike, measure these too.
Height (C), as indicated by the blue line, is rather indicative. On motorcycles with a top case, the cover comes off the ground a little higher, which is not a problem with the ground, which does not cause any problems.
| S | M | L | XL | XXL | 3XL | ||
|---|---|---|---|---|---|---|---|
| A | 210 | 230 | 250 | 280 | 325 | 345 | cm |
| B | 80 | 80 | 80 | 95 | 100 | 110 | cm |
| C | 122 | 122 | 122 | 122 | 125 | 125 | cm |
